All Products
Eltek Smartpack R 242100.120 Retrofit Controller Module Monitor
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Details
| Brand | Eltek | Part Number | 242100.120 |
|---|---|---|---|
| Country Of Origin | China | ||
| High Light | 242100.120 Retrofit Controller Module Monitor,242100.120 |
||
You can tick the products you need and communicate with us in the message board.
| Brand | Eltek | |
|---|---|---|
| Part number | 242100.120 | |
| Country of Origin | China |
Product Description
Eltek Smartpack R 242100.120 Controller Module Monitor
Future fit power. It is a simple idea with tremendous effect: Replace your old first-generation Smartpack controller with the Smartpack R to make your power system ready for a high-speed, high-capacity and connected tomorrow. This retrofit will bring your existing power system in line with current requirements, prolong its lifetime and thereby reduce both the lifetime operating costs and the need for new investments in power.
| Model | Smartpack R |
| Part number | 242100.120 |
| INPUT DATA | |
| Voltage (nominal) | 10 - 75 VDC |
| Power Consumption | 3 W (display sleep, no dist. CAN Power, LVD activation, no USB power) |
| 25 W (display on, dist CAN Power, LVD activation, USB Power) | |
| SYSTEM CONNECTIONS - SYSTEM | |
| MONITORS | |
| Voltage sense, system voltage support | 12 VDC, 24VDC, 48VDC & 60VDC |
| Current sense, shunt support | 0 - 20mV, 0-50mV, 0 - 60mV and 0-100mV |
| Battery fuse monitoring | Auxiliary switch NO/NC, Pull up/down |
| Load fuse monitoring | Auxiliary switch NO/NC, Diode Matrix Pull up/down |
| Battery temperature monitoring | AD590 sensor input |
| Battery symmetry monitoring (built in) | 4 x Analog Voltage[0-75V] inputs (12, 24 or 60V blocks) |
| SYSTEM CONNECTIONS - LVD | |
| CONTROL | |
| Battery disconnect | 1 (latched or non-latched supported) |
| Load disconnect | 2 (latched or non-latched supported) |
| GENERIC INPUTS AND OUTPUTS | |
| Digital configurations, Inputs #1-6 | Auxiliary switch: NO/NC |
| Analog configurations, Inputs #1-2 | Analog Voltage[0-75V] (Configure as NO, NC, Diode Matrix sense or Voltage sense) |
| Analog configurations, Inputs #3-6 | Analog Voltage[0-75V] (Configure as NO, NC, Diode Matrix sense or Voltage sense) Support: |
| Temperature sense w/ NTC probe | |
| Output configurations, Outputs #1-6 | 6x Relay–Dry/Form C - Configurable Normally Open/Closed [Max capacity 75V/2A/60W] |
| CONTROL SYSTEM CONNECTIONS | |
| CAN Power | Distributed CAN Power available +/- 500mA |
| CAN Nodes | Support: I/O Monitors, Battery String Monitor, Load/Current Monitor, Fleximonitor, AC Mains Monitor |
| & Smartnode (legacy) | |
| USER INTERFACE | |
| Local | Alphanumeric LCD display (Chinese Traditional and Simplified supported) & 3 keys |
| Ethernet port | 10/100 BASE-T (optional: 1000 BASE-T) IPv4/v6 |
| (eth 0: LAN port) | IP protocols: HTTP (HTML5 Responsive User Interface) / SSL(TLS w/ self-signed certificate |
| (eth 1: Craft port w/DHCP, USB Device | generator or load authenticated certificates), SNMP v3 w/Generic MIBs & Enterprise MIB type: SP2- |
| port) | MIB (Eltek Branch 10), MODBUS TCP and pComm UDP (PowerSuite), VPN, VLAN, NTP, SFTP &RADIUS |
| USB Host USB Device |
Flash Drive for SWFW upgrade and XML configuration file loading |
| Config read from Smartpack 1 Gen USB Device port | |
| wlan0: WiFi dongle for wireless craft port, wwan0: 4G USB Cellular Modem | |
| eth2: Ethernet Gigabit | |
| PC – pComm – Windows PowerSuite | |
| Serial ports | RS-232 and RS-485 on RJ11 connector |
| Serial protocols: MODBUS RTU Slave, MODBUS RTU/ASCII Master (several pre-defined types and | |
| full generic configurable data reader available), Modem Call-Back/SMS reporting (PSTN or GSM) | |
| and pComm (PowerSuite) | |
| GENERAL SPECIFICATIONS | |
| Dimensions (WxHxD) | 109 x 44 (1U) x 156 mm (4.3 x 1.75 x 6.1”) [Chassis dept: 140 mm] |
| Temperature Range | Operating -20 to +65˚C (-40 to 149˚F) |
| DESIGN STANDARDS | |
| Electrical safety | UL 60950-1, 2ed, 2014-10-14, EN 60950-1:2006/A2:2013 |
| EMC | ETSI EN 300 386 V.2.1.1, EN 61000-6-1(2007) /-2(2005) /-3(2012) /-4(2011), |
| FCC CFR47 Part 15B section 109: 2010 | |
| Environment | ETSI EN 300 019: 2-1 v2.3.1 (Class 1.2), 2-2 v2.4.1 (Class 2.3) & 2-3 v2.4.1 (Class 3.2) |
| 2011/65/EU (RoHS) & 2012/19/EU (WEEE) | |
| Normal operating conditions as per IEC 62040-5-3:2016 clause 4.2. Other operating conditions as per IEC 62040- | |
| 5-3:2016 clause 4.3, must be advised | |
Recommended Products