All Products
Eltek Smartpack S Panelmount 242100.415 Controller Module Monitor
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Details
| Brand | Eltek | Part Number | 242100.415 |
|---|---|---|---|
| Country Of Origin | China | ||
| High Light | 242100.415 Eltek Smartpack S Panelmount,242100.415 |
||
You can tick the products you need and communicate with us in the message board.
| Brand | Eltek | |
|---|---|---|
| Part number | 242100.415 | |
| Country of Origin | China |
Product Description
Eltek Smartpack S Panelmount 242100.415 Controller Module Monitor
COMPACT,RICH-FEATURED,HOTSWAPPABLE,ALL-IN-ONECONTROLLER
- The SmartpackS covers all control and monitoring needs of small to medium telecom and industrial DC power systems. Status and configuration is fully available through the display locally, or through the Ethernet plug both remote or locally.
- Designed for the FlatpackS and Flatpack2 system platform,the SmartpackS finds its way into many applications.
| Part number | 242100.415 |
| INPUT DATA | |
| Voltage (nominal) | 10 - 75 VDC |
| System output grounding | Supports positive, floating and negative distributions. All inputs are referenced to shunt. |
| Power Consumption, max - no relays energized max - all relays energized |
3,1W (display sleep) 5,5W (display on) |
| SYSTEM CONNECTIONS - SYSTEM MONITORS |
|
| Voltage sense, system voltage support | 12 VDC, 24VDC, 48VDC & 60VDC |
| Current sense, shunt support | 0 - 20mV and 0 - 60mV |
| Battery fuse monitoring | Auxiliary switch NO/NC, Pull up/down |
| Load fuse monitoring | Auxiliary switch NO/NC, Diode Matrix Pull up/down |
| Ground fault detection | Simple bridge circuit detection [Tolerance: ±10%, alarm range: 25kΩ – 500kΩ] |
| Fan speed monitoring | Tacho sense 0-65000 rpm [Input max. 15V] |
| SYSTEM CONNECTIONS - LVD CONTROL | |
| Battery disconnect | 1 (latched or non-latched supported) |
| Load disconnect | 1 (latched or non-latched supported) |
| INPUTS AND OUTPUTS | |
| Digital configurations, Inputs #1-6 | Auxiliary switch: NO/NC Temperature (for NTC probe) |
| Analog configurations, Inputs #1-4 | Analog Voltage[±0 - 10V] ±4-20mA current measurement (through external 470kΩ resistor) |
| Analog configurations, Inputs #5-6 | Analog Voltage[0-75V] Symmetry measurement |
| Output configurations, Outputs #1-6 (alarms) |
6x Relay–Dry/Form C Configurable Normally Open/Closed [Max capacity 75V/2A/60W] |
| Fan Control | Analog Voltage [0 - 10V] Output Current 0 - 20 mA Fan Input Impedance minimum 10 kΩ |
| CAN Power Available for Eltek CAN Nodes | 500mA |
| USER INTERFACE | |
| Local | 2.2” TFT 65k Colour display, QVGA resolution, 4 keys |
| Ethernet port | 10/100 BASE-T (HP Auto MDI/MDI-X) IP protocols: HTTP / SSL, SNMP v3, MODBUS TCP and pComm UDP (PowerSuite) |
| Serial port | RS-232 and RS-485 on RJ11 connector Serial protocols: MODBUS RTU, Modem Call-Back/SMS reporting (PSTN or GSM), COMLI, CSCP and pComm (PowerSuite) |
| GENERAL SPECIFICATIONS | |
| Dimensions (WxHxD*) * depth behind panel | 232.2 x 76.2 x 33.0mm (9.1 x 3 x 1.3”) |
| Temperature Range | Operating -20 to +65˚C (-40 to 149˚F) |
| DESIGN STANDARDS | |
| Electrical safety | UL 60950-1-3rd edition, EN 60950-1-3rd edition |
| EMC | ETSI EN 300 386 V.1.4.1 EN 61000-6-1 / -2 / -3 / -4 FCC Part 15 Subpart 109 |
| Environment |
ETSI EN 300 019: 2-1 (Class 1.2), 2-2 (Class 2.3) & 2-3 (Class 3.2) |
Recommended Products